联系方式： 欢迎来电咨询：1895194****(微信同号)，固定电话：********* ********* QQ：3167096730 User Manual of SHIANDA Brand Anti-Electric Shock Warning Device SHIANDA brand anti-electric shock warning device series are developed by our company with our own intellectual property. The product has been tested by Quality Inspection and Test Center for Electric Power Industry Safety Devices (test No.: DAZ1802168) and the products are applicable for staff who work on power generation, transformer, power transmission, power distribution, agricultural power and electric equipments (including installation personnel for infrastructure construction). When these persons install or repair equipments in the dangerous environment with high and low voltage lines and electric equipments, if the lines are connected with power and the distance between them and the electric lines is shorter than the safety distance, the device will warn and prompt them that they are close to the electric line and they should operate strictly in compliance with safety regulations. The device can be installed in helmet or be carried by the staff and it’s a type of extremely effective auxiliary safety protection products for special type electric operation staff. I*oduction of Performance 1. The warning distances are listed in the following table: Voltage Level *Minimum Safety Distance for DL 409-91 (meter) Warning Distance 0.22/0.38KV >0.5M 10KV 0.70 0.7-1.2M 35KV 1.00 1.0-2.0M * 110KV 1.50 1.5-2.5M * 220KV 3.00 3.0-4.0M *Minimum safety distance between staff and the electric line when the staff works with DL 409-91 on electric transmission pole or tower. *110KV and 220KV voltage levels are provided only for 220KV anti-electric shock warning device. Please check the band scale on the anti-electric shock warning device 1. Press the button; when the device “ticks”, it means the warning device is turned on and the warning circuit starts to work. 2. Press the button until the device sounds tone for about one second, and now it means the warning device has been turned off. 3. Self-inspection function – to prevent wrong operation from turning off the device and causing accidents, the warning device has self-inspection function. l If the device is on: press button and you hear the sound “tick… tick… tick… tick”, it means the warning device is on and you can use it normally. Now if the warning device is within the detection range, the warning horn sounds continual alarms. l If the device is off: Press the button and you will hear “Tick”, it means the device is turned on and you can use it normally. Now when the warning device is within the detection range, the warning horn sounds continual alarms. 4. This product adopts digital integrated circuit and it has small bulk, light weight and small power consumption. It’s not affected by outside climate or temperature and its working performance is stable and reliable. Description on Usage 1. Please turn the band switch to suitable *ition before you work every day. Press the button and if you hear “Tick”, or “Tick…Tick…Tick…Tick”, it means the device is on. After the device is turned on, test the device with simulation inspection. Only if the device works normally in the simulation inspection, can you use it for work. If you do not hear “Tick” sound even if the device is turned on for several times, it means the power of the battery has been used out and you need replace the used battery with new No. 7 alkali battery before you use it again. 2. When you check or repair aerial power lines, communication lines or electric device and you are within the warning distance, if the warning device sounds continual alarms, it means the lines and the electric equipments are connected with power, so please be careful of your safety during work. 3. The warning device only works only for 220V or above alternate current with working frequency 50HZ-60HZ. The circuit can resist interference through digital filtering and can work stably and reliably. Note: the warning device does not work for direct current, high frequency current or static. 4. When the work is completed, please turn off the device to reduce battery consumption. Important Hint: For your safety, please use the products properly; do not crash or s*p the warning device series electronic products. Please keep the products against water and damp and do not dismantle the device by yourselves. The company provides three guarantees services (barring man-made damage) within the 1st year after sales and a life-long repair warranty (only charge materials cost during three guarantees period). Inspection Report of Quality Inspection and Test Center for Electric Power Industry Safety Devices No:DAZ1802168 Company Name: Nanjing InfoSoft Information Technology Co., Ltd. Customer Service Telephone No.********* 产品实拍 南京天尚电气有限公司 高空作业车防触电报警 高压电力设备近电预警 防触电报警器 近电预警器 边界报警 语音报警 安全帽报警器 吊车近电报警 公司简介 南京天尚电气有限公司致力于电力、通信高科技电子产品的开发、生产及销售企业, 拥有多项高科技产品的专有技术、专有软件，公司有数十位专业软硬件工程师，将为您精心选型配套，提供产品、技术、方案、研发。
南京天尚电气有限公司
